 |
GYY2, type 3 , 4 tube electric heat component series |
|
一.Use
GYY2 , 3,, 4 type heat component use for person who wide open or closed oil groove heat oil spend, can heat water and conduct heat kind other medium than oil too.
GYY2, 3 types are suitable for heating the oil in the widing open type or the closed oil groove, the maximum temperature is about 300 degrees Centigrade.
GYY4 type is suitable for heating the oil which heat inside of circulatory system, the working temperature of height is about 100 degrees Centigrade the most.
二.Structure , external dimension and technical data
GYY2 , 4 type oil heater weld at flange committing crooked piece , champion of tube , that take shape. The tube material is steel or stainless steel No. 10, the diameter of the component is φ 12mm. GYY3 type is in charge of U type, the diameter is φ 12mm.
|
|
三.Operation instructions
1.The working voltage can't exceed 1 of its specified value . 1, outer cover should effective earth.
2.Working environment : Temperature is not greater than 95%, there are no explosibility , corrosivity gas.
3.Size " C " must be all invaded so as not to burn out in the oil (and check regularly) in the picture. There should not be corrosivity to heat the oil. (component is 10 #s) steel
4.Melt pitch , paraffin wax solid state oils should reduce voltage use , rise to specified voltage after melting.
5.Find tube surface is it at forming charcoal , must use after eliminating to have , so as not to efficiency of reducing, even burn out.
6.Must keep qualifying for the next round of competitions in the tip drily , cleanly, so as not to lead to the fact the surface glimmers or short circuit.
7.The component should be left in the dry place that ventilate, if put it when lower than 1M|?to the insulating resistance of ground for a long time, but dry to can return to normal several hours among 200 about oven.
8.Mounting hole φ 66mm of GYY4 , 2 types, Model GYY3 fastener M18 *1. 5, long 25mm |
|
|
|
