NOW：
GYQ4 5 6 Type tube electric heat component series

一.Use and appearance
　GYQ4 5 6 Type tube electric heat component used in various kinds of drying cabinets , oven , paint dryness and air to heat etc., the tube material is steel or stainless steel No. 10, can also adopt the stainless steel , the working temperature of height is 300 degrees Centigrade the most.
　Model GYQ6 electric heat component suitable for metal pigeonhole mould is it spend to heat , tube material steel or stainless steel No. 10.

二.Operation instructions
　1.Point of component is it should defend in heat preservation , heat room to connect , select for use electric heat is it is it generate heat position can't enter oven and case a heat preservation to should pay attention to to in charge of, do not exert oneself too quicklily at the time of wiring.
　2.The working voltage of the electric heat component can't exceed 1 of its specified value . 1, outer cover should effective earth.
　3.The component working environment of electric heat , temperature is not greater than 95%, there are no explosibility , corrosivity gas.
　4.The electric heat component should be left in the dry place that ventilate, if put it when lower than 1MΩ?to the insulating resistance of ground for a long time, can bake over a slow fire baking in oven of about 200 degrees Centigrade , until returning to normal.